Elegance Intermittent

  • high performance, low carbon axial fans
  • control condensation
  • standard, timer, humidistat and SELV models
  • powerful low profile units
  • wall, ceiling or window (with additional window kit)
  • low noise levels
  • low running costs
  • for any domestic wet room
  • complies with Building Regulations Parts L1A 2013 and F 2013


  • exhausts directly to the outside (through wall, or window installation with additional window kit, or with medium length ducting)
  • easy and economical to install and maintain
  • suitable for toilets, shower-rooms, bathrooms, utility rooms and kitchens
  • 2 Speed versions - boost speed by means of integral cord, or after removing cord with:
    • remote switch
    • PIR sensor
    • humidistat
  • anti-vibration gasket
  • patented anti-turbulence deflectors ensure very low noise levels and optimum performances
  • energy saving ventilation
  • extremely low running costs
  • low carbon footprint
  • 2 year warranty

Vectaire Ltd can supply all accessories for use with these units, including product filters. air filter cassettes, silencers, fire dampers, air valves, ducting, outside grilles and wall cowls. Additionally, Vectaire offers a design service to ensure that the unit installed is the best possible to provide efficient, effective, low energy and low running cost ventilation. Vectaire can also organise installation, commissioning and maintenance of these products. N.B These fans are NOT suitable for use with Gravity Grilles. They should be installed using either Cowls or Fixed Grilles. Only approved accessories should be used: Wall Plates – as required Window kits – as required Wall terminations – all wall terminations must use the approved wall cowl or high rise kit

Back to top


  • shockproof, high quality technopolymer casing
  • designed using latest wind tunnel technology and CFD simulations
  • motor with thermal protection
  • 43,000 hour life motors with maintenance free and long life ball bearings
  • operates in ambient temperatures up to 40ºC
  • double insulated - no earth required
  • IPX4 Splashproof rated - can safely be installed in Zones I and II

Back to top


  • Part L1A 2013 of Building Regulations for enhanced energy saving capability
  • Part F 2013 of Building Regulations for reliable, efficient ventilation
  • EU RoHS Directive Compliant.
  • Complies with IEC60335-2-80, LVD2006/95/CE and EMC2014/30/UE (European Directive against radio interference and electro-magnetic compatibility
  • CE marked

Back to top


4"10cm size

  • EL100 - Standard
  • EL100T - with overrun Timer
  • EL100HT - with Humidistat and Timer
  • EL100LV - SELV low voltage
  • EL100TLV - SELV low voltage with Timer
  • EL100/2AC - 2 Speed, Cord or Remote

6"/15cm size

  • EL150 - Standard
  • EL150T - with overrun Timer
  • EL150HT - with Humidistat and Timer
  • EL150/2AC - 2 Speed, Cord or Remote

N.B timer adjustable from 3-25 mins

Back to top


**Turbulence Reducing Deflectors*Lateral Intake

Back to top



Back to top



Back to top

Typical specification

Supply and Install an EL100HT high performance, low carbon axial fan which is suitable for installation in toilets as supplied by Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Bucks, HP12 3RH.

The fan is to be suitable for installation either into a wall, ceiling or window (with the appropriate accessories). The fan should have an air intake around the whole perimeter and have a footprint of no larger than 160mm square.

The fan is to be complete with integral humidistat and timer - the timer to be adjustable from 0-25 minutes.

The fan casing should be made of shock-proof, high quality technopolymer, and should have a low carbon motor with maintenance-free, long life ball bearings, and up to a 30,000 hour life. It should be protected with a thermal cut-out. The fan should be double insulated and be lPX4 splashproof protected suitable for installation into Zones I and Il.

The fan is to comply with IEC 60335-2-80, LVD2006/95/CE and EMC 2014/30/EU European Directive against radio interference and electro-magnetic compatibility and be CE marked. It should also comply with the latest Building Regulations requirements.

The fan should be supplied with a user guide as required.

Only approved accessories should be used: Wall Plates – as required Window kits – as required Wall terminations – all wall terminations as required

Back to top